SDI-D WILL ADD RS232 DATA TO ANY SDI CCTV SIGNAL WITHOUT ADDITIONAL WIRES
These units provide an RS422 PTZ Data Link on any HD CCTV signal. Use them to add (PTZ) Pan Tilt Zoom control to any existing video camera without running additional wires. The RS422 control signal shares the coaxial cable path in the reverse direction to control the camera PTZ without interfering with the SDI video image.
The units can also be used in the reverse direction to deliver RS422 data from the camera location back to the monitor location. Applications like cash register data or card access data can ride on the existing SDI video return without the need to pull extra wires. This is particularly useful when cable access is limited or the expense of digging up sidewalks or breaking into walls is prohibitive. You can insert your data anywhere on the cable and recover the data at any other location along the cable path up to 150 meters.
The system is housed in Bone colored ABS enclosures that have a UL flame rating of 94-VO and is powered by 24 Volt AC or DC power transformers, (24 Volt AC transformers are supplied with the units). The current draw is low allowing the units to be connected to the same power supply as the camera. Both the units have LED indicators for easy set-up.
DATA INPUT SPECIFICATIONS
FormatRS422 (PTZ Control)Connector2 Pos. Screw Terminal
Data Rate0-38K Baud
Impedance100 Ohms (Balanced)
SDI INPUT
StandardAll Types
ImpedanceHi-Z SDI Video loop through
Connectors2 BNC (female) Input/Output
MECHANICAL
Size5.50″L X 3.3″W X 2.0″DPower 24 Volts AC/DC 50mA
Power cube 24 Volts AC (included)
SDI-DRX
DATA OUTPUT SPECIFICATION
Format RS422 (PTZ Control)Connector 2 Pos. Screw Terminal
Data Rate 0-38K Baud Impedance 100 Ohms (Balanced)
SDI INPUT
Standard All Types
Impedance Hi-Z SDI Video loop through
Connectors 2 BNC (female) Input/Output
MECHANICAL
Size 5.50″L x 3.3″W x 2.0″DPower 9-24 Volts AC/DC 50mA
Power Cube 24 Volts AC (included)
For more information and pricing call: 800-235-6960.
