Press Releases
NEW HD CAMERA FOCUS METER for TVI, CVI and AHD video
NEW PRODUCT NEWS RELEASE FOR ADDITIONAL INFORMATION CALL: Don McClatchie PHONE: 800-235-6960 E-Mail: [email protected] Website: fmsystems-inc.com FM SYSTEMS, INC. announces the new HDFM-1 Camera Focus Meter for High Definition analog Cameras. The HDFM-1 meter measures HD Camera focus with numeric and bar graph displays to remove the subjective nature of setting cameras by eye
P.O.E. MEASUREMENT TOOL HELPS WITH IP CAMERA INSTALLATIONS
The POET-1 is a tool that gives you access to the P.O.E. Power Over Ethernet voltage in your IP video system so that you can measure the correct working voltage. To make a measurement of the P.O.E. source voltage on any network cable you connect
FM SYSTEMS, INC. ANNOUNCES A NEW PRODUCT TO ADD RS422 TO ANY VIDEO SIGNAL.
This product provides an RS422 PTZ Data Link on any coaxial cable or UTP twisted pair wire video path. Use it to add (PTZ) Pan Tilt Zoom control to any existing video camera without running additional wires or the expense of vertical interval control equipment.
FM SYSTEMS, INC. ANNOUNCES NEW PRODUCT FOR HD-TVI CONTACT RELAY CONTROL
With all the advantages of the HD-TVI standard comes some new opportunities one of them is the ability to send contact relay control and telemetry information along with the video signal on the same coaxial cable without interfering with the High Definition picture information.
IP video Loss Detector for Gas Station TSSA Compliance.
The IPG-1 Camera Guard monitors the communication path of four separate IP camera data signals. This supervisory system will identify the loss of any video data signal due to removal of the camera, loss of power to the camera, a camera cable disconnect, or a
Video Loss Detector used to meet TSSA Ruling.
The CG-1 Camera Guard system supervises the signal continuity of a video signal from CCTV cameras or any video source. This supervisory system will identify loss of the video signal due to removal of the camera, loss of power to the camera, a camera cable
IPX-24 A/B SWITCHING CCTV WITHOUT SOFTWARE ACCESS
The IPX-24 IP VIDEO RELAY SWITCH is a 24 Volt operated 2X1 IP video network switch. It is controlled by an external 24 Volt AC or DC power source. With no power applied the network Common (COM) is connected to the primary (A) IP network.
FMC664CC BRINGS FM BAND RADIO TO CABLE TV SYSTEMS
The FMC664CC is a channel-for-channel FM-band converter with agile input and output frequency tuning in the 88-108 MHz band. Offset output frequency capability in the A-1 and A-2 band (108-120 MHz) is available upon special request. Both the input and output frequencies are field selectable
THE SCT/SCR-8 BRINGS REMOTE CONTROL AND TELEMETRY TO HDTV VIDEO
These devices transmit relay contact control and alarm signals over any digital or analog audio link. The control signal is encoded in the audio channel prior to digitizing so it works with all digital compression systems. This system can be used with any existing audio