Description
Alarm Transmitter Unit
Download Specifications
Download Instruction Manual
Download Related Article
Part Number: ATU-2
Title: Alarm Transmitter Unit
Category: A/V Baseband Products
Industry: CCTV/Security, TV/Radio Broadcast, CATV Cable Industry
Description:
These devices transmit and receive alarm and control contact closures encoded on a video or HD-TVI signal in coaxial cable, twisted pair wire or microwave. You can insert your alarm and control signals anywhere a video signal is being used, including optical laser transmission and wireless transmission of video. Alarm and control signals may be carried over any distance by the video signal. Telemetering and control contact closures are encoded onto the video signal by the transmitter unit and decoded to relay outputs at the receiver unit.
The ATU-2 ALARM TRANSMITTING UNIT and the ARU-2 ALARM RECEIVING UNIT together make up a 2 channel alarm and control system which can provide up to 6 alarm and control channels on any one video signal. The alarm and control signals are inserted onto the Vertical Interval of the video signal so that they will not interfere with the picture. When the video signal is recorded, the alarm and control information is also recorded and can be recalled at play-back. Alarm and control signals will be correlated with the video events.
Each pair of ATU-2 / ARU-2 will transmit 2 alarms. Three sets of units may be connected to any one video channel, allowing 6 alarms to be transmitted on one coaxial cable. The operating channel can be set by the user in the field with the internal program jumper jacks. If more contact closures are required please ask about ATU-8 / ARU-8 for eight channels.
One channel of the ATU-2 / ARU-2 can be used as a system alarm that will operate upon loss of power to either terminal, loss of the video signal or loss of transmission path (cable cut). In the event of power failure the video through-put is not interrupted. Contact closures to the ATU-2 input will be repeated as contact relay closures at the ARU-2 output.
The system is housed in Bone colored ABS enclosures that have a UL flame rating of 94-VO and is powered by 24 Volt AC or DC power transformers ( 24 Volt AC transformers are supplied with the units). The current draw is low allowing the units to be connected to the same power supply as the camera. Both the transmitter and receiver have power on/video on LED indicators for easy set-up.
If this product page shows “out of stock” the product is in production and can be purchased with a lead time of 1-2 weeks or less depending on quantity. To place an order for this product call 1-800-235-6960 and ask for the sales department. Or E-Mail your order to fmsystemsinc@sbcglobal.net. Most orders ship within a few days.
ATU-2
ALARM INPUT
Channels, 2
Connector, 4 Pos. Screw Terminal
Alarm Sense, Contact closure (Loop)
Maximum Loop Resistance, 1K ohm
VIDEO INPUT
Standard, NTSC, and HD-TVI
Impedance, Hi-Z Video loop through
Connectors, 2 BNC (female) Standard
Line Selection (field agile), Line 10 – 15 Both fields
MECHANICAL
Size, 5.50″L X 3.3″W X 2.0″D
Power, 9 – 24 Volts AC/DC 50 mA
Power cube, 24 Volts AC (included)
ARU-2 ALARM RECEIVING UNIT
ALARM OUTPUT
Channels, 2
Connector, 4 Pos. Screw Terminal
Alarm Report, A Form Relay 1 Amp Max.
VIDEO INPUT STANDARD, NTSC, or HD-TVI
Impedance, Hi-Z Video loop through
Connector, 2 BNC (female) Standard
Line Selection (field agile), Line 10 – 15 Both fields
MECHANICAL
Size, 5.50″L x 3.3″W x 2.0″D
Power, 24 Volts AC/DC 50 mA
Power Cube, 24 Volts AC (included)
