By: Don McClatchie
When you have an installation that requires remote control of a gate, light, or other equipment and you only have one relay to operate you can use Direct Current (DC) or Alternating Current
By: Don McClatchie
This is for those who have been trying to make an AR1010 sub-board work using PIC BASIC Pro and a Pic Microcontroller. I was not able to find any examples of BASIC programming for this neat little radio sub-board using the AR1010 from
By: Don McClatchie
Video low pass filters are useful to reduce noise for analog video signals and as anti-aliasing for analog to digital equipment designs. When used in analog noise reduction designs the cut-off frequency is set just above the highest useful frequency in the
By: Don McClatchie
How to add control relays to HD Video is a question that I get from time to time. The new analog HD-Video cameras referred to as AHD, TVI, and CVI are being installed in greater quantities because they can provide the needed High
By: Don McClatchie
Measuring battery State of Charge can be a tricky business especially if the battery is in service connected to a source or drain of current. I am sure that many of you have measured a battery and found the voltage to be